#include <RandomOmegaFlipMover.hh>

Inheritance diagram for protocols::simple_moves::RandomOmegaFlipMover:

[legend]

Public Member Functions
	RandomOmegaFlipMover ()

	RandomOmegaFlipMover (core::kinematics::MoveMapOP move_map)

	RandomOmegaFlipMover (RandomOmegaFlipMover const &other)

	~RandomOmegaFlipMover () override

void	apply (core::pose::Pose &pose) override
	Main Method. More...

protocols::moves::MoverOP	clone () const override
	Return a clone of the Mover object. More...

protocols::moves::MoverOP	fresh_instance () const override
	Generates a new Mover object freshly created with the default ctor. More...

void	parse_my_tag (utility::tag::TagCOP tag, basic::datacache::DataMap &) override
	Called by MoverFactory when constructing new Movers. Takes care of the specific mover's parsing. More...

void	movemap_factory (core::select::movemap::MoveMapFactoryCOP new_movemap_factory)

std::string	get_name () const override
	RandomOmegaFlipMoverCreator interface, name of the mover. More...

Public Member Functions inherited from protocols::moves::Mover
	Mover ()

virtual MoverOP	create ()

MoverCOP	get_self_ptr () const

MoverOP	get_self_ptr ()

MoverCAP	get_self_weak_ptr () const

MoverAP	get_self_weak_ptr ()

	Mover (std::string const &type_name)
	sets the type for a mover; name_ has been removed (2010/05/14) More...

virtual void	test_move (Pose &pose)
	: Unit test support function. Apply one move to a given pose. Allows extra test specific functions to be called before applying More...

virtual bool	reinitialize_for_each_job () const
	Inform the Job Distributor (August '08 vintage) whether this object needs to be freshly regenerated on each use. More...

virtual bool	reinitialize_for_new_input () const
	Inform the Job Distributor (August '08 vintage) whether this object needs to be regenerated when the input pose is about to change, (for example, if the Mover has special code on the first apply() that is only valid for that one input pose). More...

MoverStatus	get_last_move_status () const
	end parser interface, start Job Distributor interface///////////// More...

void	reset_status ()
	resets status to SUCCESS, meant to be used before an apply(). The job distributor (august 08 vintage) uses this to ensure non-accumulation of status across apply()s. More...

virtual core::pose::PoseOP	get_additional_output ()
	Mechanism by which a mover may return multiple output poses from a single input pose. More...

void	set_type (std::string const &setting)
	Set the 'type' string. More...

std::string	get_type () const

void	type (const std::string &type_in)
	Set the 'type' string. More...

std::string const &	type () const
	Get the set 'type' string. More...

virtual void	set_input_pose (PoseCOP pose)
	setter for poses contained for rms More...

virtual void	set_native_pose (PoseCOP pose)
	setter for native poses contained for rms -— we should get rid of this method? it is widely used, but a bit unsafe More...

PoseCOP	get_input_pose () const

PoseCOP	get_native_pose () const

void	set_current_job (protocols::jobdist::BasicJobCOP job)

jobdist::BasicJobCOP	get_current_job () const

virtual void	set_current_tag (std::string const &new_tag)

std::string	get_current_tag () const
	A tag is a unique identifier used to identify structures produced by this Mover. get_current_tag() returns the tag, and set_current_tag( std::string tag ) sets the tag. This functionality is not intended for use with the 2008 job distributor. More...

virtual void	show (std::ostream &output=std::cout) const
	Outputs details about the Mover, including current settings. More...

virtual core::Real	last_proposal_density_ratio ()

virtual void	clear_info ()
	Strings container can be used to return miscellaneous info (as std::string) from a mover, such as notes about the results of apply(). The job distributor (Apr 09 vintage) will check this function to see if your protocol wants to add string info to the Job that ran this mover. One way this can be useful is that later, a JobOutputter may include/append this info to an output file. More...

virtual Strings &	info ()
	non-const accessor More...

virtual Strings const &	info () const
	const accessor More...

virtual void	provide_citation_info (basic::citation_manager::CitationCollectionList &) const
	Provide citations to the passed CitationCollectionList Subclasses should add the info for themselves and any other classes they use. More...

Static Public Member Functions
static std::string	mover_name ()

static void	provide_xml_schema (utility::tag::XMLSchemaDefinition &xsd)

Static Public Member Functions inherited from protocols::moves::Mover
static std::string	name ()

static void	register_options ()
	Overload this static method if you access options within the mover. More...

Protected Member Functions
void	setup_torsion_list (core::pose::Pose &pose)
	Look at all the bb torsions, make a list of the ones that can move. More...

core::kinematics::MoveMapCOP	movemap (core::pose::Pose const &pose)
	Get the movemap for this pose. More...

Protected Member Functions inherited from protocols::moves::Mover
void	set_last_move_status (MoverStatus status)
	nonvirtual setter for MoverStatus last_status_. Protected means that only the mover itself will be able to change its own status. The job distributor (august 08 vintage) is aware of status set with this function and will do what the MoverStatus says. More...

Private Attributes
core::select::movemap::MoveMapFactoryCOP	movemap_factory_

core::kinematics::MoveMapOP	move_map_

utility::vector1< core::id::TorsionID >	torsion_id_list_

Additional Inherited Members
Public Types inherited from protocols::moves::Mover
typedef utility::tag::TagCOP	TagCOP

typedef core::pose::Pose	Pose

typedef core::pose::PoseCOP	PoseCOP

typedef std::list< std::string >	Strings

Detailed Description

Simple class that flips a random omega selected from a movemap 180 degrees

Constructor & Destructor Documentation

◆ RandomOmegaFlipMover() [1/3]

protocols::simple_moves::RandomOmegaFlipMover::RandomOmegaFlipMover ( )

◆ RandomOmegaFlipMover() [2/3]

protocols::simple_moves::RandomOmegaFlipMover::RandomOmegaFlipMover ( core::kinematics::MoveMapOP move_map )

◆ RandomOmegaFlipMover() [3/3]

protocols::simple_moves::RandomOmegaFlipMover::RandomOmegaFlipMover ( RandomOmegaFlipMover const & other )

References move_map_.

◆ ~RandomOmegaFlipMover()

protocols::simple_moves::RandomOmegaFlipMover::~RandomOmegaFlipMover ( )

overridedefault

Member Function Documentation

◆ apply()

void protocols::simple_moves::RandomOmegaFlipMover::apply ( core::pose::Pose & )

overridevirtual

Main Method.

Implements protocols::moves::Mover.

References core::pose::Pose::conformation(), core::scoring::rg, core::conformation::Conformation::set_torsion(), setup_torsion_list(), core::conformation::Conformation::torsion(), and torsion_id_list_.

◆ clone()

protocols::moves::MoverOP protocols::simple_moves::RandomOmegaFlipMover::clone ( ) const

overridevirtual

Return a clone of the Mover object.

clone is meant to return an OP'ed deep copy of this object. This really should be a pure virtual in the base class, but adding pure virtuals to Mover would massively disrupt the code. This default implementation crashes at runtime instead of compiletime if you try to call it. If this code is causing you problems, your Mover needs to override this function.

Reimplemented from protocols::moves::Mover.

◆ fresh_instance()

protocols::moves::MoverOP protocols::simple_moves::RandomOmegaFlipMover::fresh_instance ( ) const

overridevirtual

Generates a new Mover object freshly created with the default ctor.

fresh_instance is meant to return a new object of this class, created with the default constructor. This really should be a pure virtual in the base class, but adding pure virtuals to Mover would massively disrupt the code. This default implementation crashes at runtime instead of compiletime if you try to call it. If this code is causing you problems, your Mover needs to override this function. This is used by the August 08 job distributor.

Reimplemented from protocols::moves::Mover.

◆ get_name()

std::string protocols::simple_moves::RandomOmegaFlipMover::get_name ( ) const

overridevirtual

RandomOmegaFlipMoverCreator interface, name of the mover.

RandomOmegaFlipMoverCreator interface, returns a unique key name to be used in xml file

RandomOmegaFlipMoverCreator interface, return a new instance

Implements protocols::moves::Mover.

References mover_name().

◆ movemap()

core::kinematics::MoveMapCOP protocols::simple_moves::RandomOmegaFlipMover::movemap ( core::pose::Pose const & pose )

protected

Get the movemap for this pose.

References move_map_, and movemap_factory_.

Referenced by setup_torsion_list().

◆ movemap_factory()

void protocols::simple_moves::RandomOmegaFlipMover::movemap_factory ( core::select::movemap::MoveMapFactoryCOP new_movemap_factory )

inline

References movemap_factory_.

Referenced by parse_my_tag().

◆ mover_name()

std::string protocols::simple_moves::RandomOmegaFlipMover::mover_name ( )

static

Referenced by get_name(), protocols::simple_moves::RandomOmegaFlipMoverCreator::keyname(), and provide_xml_schema().

◆ parse_my_tag()

void protocols::simple_moves::RandomOmegaFlipMover::parse_my_tag	(	utility::tag::TagCOP	tag,
		basic::datacache::DataMap &	data
	)

overridevirtual

Called by MoverFactory when constructing new Movers. Takes care of the specific mover's parsing.

Some movers need not be parsed, so we shouldn't force people to reimplement this method. However, we should be chatty about the fact that someone is using a RosettaScripts interface to a mover which didn't define parse_my_tag()

Reimplemented from protocols::moves::Mover.

References movemap_factory(), and protocols::rosetta_scripts::parse_movemap_factory_legacy().

◆ provide_xml_schema()

void protocols::simple_moves::RandomOmegaFlipMover::provide_xml_schema ( utility::tag::XMLSchemaDefinition & xsd )

static

References protocols::rosetta_scripts::append_subelement_for_parse_movemap_factory_legacy(), mover_name(), and protocols::moves::xsd_type_definition_w_attributes_and_repeatable_subelements().

Referenced by protocols::simple_moves::RandomOmegaFlipMoverCreator::provide_xml_schema().

◆ setup_torsion_list()

void protocols::simple_moves::RandomOmegaFlipMover::setup_torsion_list ( core::pose::Pose & pose )

protected

Look at all the bb torsions, make a list of the ones that can move.

I feel like there should be a better way to do this rather than having to hard code so much conectivity information about the residue and the peptide/peptoid checks. It should probably iterate over the move map rather than the pose but done is better than perfect.

References core::id::BB, core::chemical::ResidueTypeBase::is_peptoid(), core::chemical::ResidueTypeBase::is_protein(), movemap(), core::id::omega_torsion(), core::pose::Pose::residue(), core::pose::Pose::size(), torsion_id_list_, and core::conformation::Residue::type().

Referenced by apply().

Member Data Documentation

◆ move_map_

core::kinematics::MoveMapOP protocols::simple_moves::RandomOmegaFlipMover::move_map_

private

Referenced by movemap(), and RandomOmegaFlipMover().

◆ movemap_factory_

core::select::movemap::MoveMapFactoryCOP protocols::simple_moves::RandomOmegaFlipMover::movemap_factory_

private

Referenced by movemap(), and movemap_factory().

◆ torsion_id_list_

utility::vector1< core::id::TorsionID > protocols::simple_moves::RandomOmegaFlipMover::torsion_id_list_

private

Referenced by apply(), and setup_torsion_list().

The documentation for this class was generated from the following files:

src/protocols/simple_moves/RandomOmegaFlipMover.hh
src/protocols/simple_moves/RandomOmegaFlipMover.cc

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ RandomOmegaFlipMover() [1/3]

◆ RandomOmegaFlipMover() [2/3]

◆ RandomOmegaFlipMover() [3/3]

◆ ~RandomOmegaFlipMover()

Member Function Documentation

◆ apply()

◆ clone()

◆ fresh_instance()

◆ get_name()

◆ movemap()

◆ movemap_factory()

◆ mover_name()

◆ parse_my_tag()

◆ provide_xml_schema()

◆ setup_torsion_list()

Member Data Documentation

◆ move_map_

◆ movemap_factory_

◆ torsion_id_list_